Reliable AAC/AAAC ACSR Bare Conductors for Global Distribution

• Customization: Available
• Type: Insulated
• Conductor Type: Stranded
• Model NO.: ACSR / AAC /AAAC / BCC / ACAR
• Application: Overhead
• Conductor Material: Aluminum
• Sheath Material: Bare
• Insulation Material: Bare
• Material Shape: Round Wire
• Range of Application: LSOH
• Certification: ISO9001, CE, CCC, RoHS, VDE
• Brand: Xunda
• Used: Construction, Overhead, Underground, Industrial, P
• Quality: 100% Test It
• Color: Silvery White
• Transport Package: Wooden Drum, Steel Drum, Steel&Wooden Drum, Pallet
• Specification: ASTM B231, IEC61089, BS215, CSA C49, DIN 480201, I
• Trademark: Xunda Cable
• Origin: Henan
• HS Code: 7614900000
• Production Capacity: 3000 Tons/Month

Product Description

ACSR / AAC /AAAC / BCC / ACAR Overhead Bare Conductors
Application
Overhead lines, sometimes referred to as aerial conductors, are often specified where there are significant distances to cover and where these cables are best positioned far out of reach. The distances to cover, the environmental conditions it will face, and the location are all factors in specifying the appropriate cable. The main classifications of bare conductor are AAC (All aluminum conductor), AAAC (All aluminum Alloy Conductor) or ACSR (aluminum conductor steel reinforced). AAC is most commonly found in urban areas with frequent supports and short spans. It is also used in coastal regions where salt in the air can cause corrosion - the all aluminum wire providing corrosion resistance - and specified for use in the railway industry for OHL electrification. AAAC tend to be specified where greater mechanical resistance is required and where there is a reduced sag characteristic. The ACSR, with its steel reinforcement provides additional strength and where the spans run for larger distances, such as across rivers. The advantages of AAC, AAAC and ACSR come in their lightweight properties. These overhead lines have no specified voltage rating - it will depend on the type of installation - although the higher corona limit of ACSR makes it beneficial when used with high voltage and extra-high voltage transmission. The overhead line wires are manufactured in accordance with various national standards and can be sized appropriately - including GB/T1179 ASTM B231, ASTM B399, IEC 61089, DIN 48201, BS 215, BS 3242, BS EN 50182 and Spanish standard UNE 21.018. etc.

Standards
GB/T1179, IEC61089, ASTM B231, ASTM B399, BS215-1, BS3242, DIN48201, BS EN 50182 etc.

Bare conductor recommendations

Type	Description
AAC	All Aluminum Conductor
ACSR	Aluminum Conductor Steel Reinforced
AAAC	All aluminum Alloy Conductor
ACAR	Aluminum Conductor Alloy Reinforced
AACSR	All Aluminum Alloy Conductor Steel Reinforced
ACSR / AW	Aluminum Conductor Aluminum Clad Steel Reinforced
TACSR	Thermal Resistant Aluminum-alloy Conductor Steel Reinforced
ACSS	Aluminum Conductor Steel Supported
ACSS/AW	Aluminum Conductor. Aluminum-Clad Steel Supported
ACSS/TS	Aluminum Conductor, Steel Supported. Trapezoidal Shaped
ACS	Aluminum Clad Steel
CCS	Copper Clad Steel
GSW	Galvanized Steel Wire

AAC-All Aluminum Conductor

DESCRIPTION
AAC-All aluminum Conductors has the characteristics of simple structure, convenient erection and maintenance, low cost, large transmission capacity, good conductivity, sufficient mechanical strength and high tensile strength. Concentric lay stranded Aluminium Conductors (AAC) are made out of Hard-Drawn aluminum wires. 

APPLICATION
AAC is used mainly in urban areas where the spacing is short and the supports are close. All aluminium conductors are made up of one or more strands of aluminium wire depending on the end usage. AAC is also used extensively in coastal regions because it has a high degree of corrosion resistance.

STANDARDS
IEC 61089
ASTM B 231
BS EN 50182
AS 1531
GB/T 1179


AAAC -All Aluminum Alloy Conductor

APPLICATION
AAAC is used as a bare overhead conductor for power transmission and distribution lines, on aerial circuits that require a larger mechanical resistance than AAC, and a better corrosion resistance than ACSR. The sag characteristics and the strength-to-weight ratio of AAAC is better than both AAC / ACSR.

DESCRIPTION 
Concentric lay stranded Aluminium Alloy Conductors (AAAC) are made out of high strength Aluminium-Magnesium-Silicon Alloy.

STANDARDS
IEC 61089
ASTM B 399
BS EN 50182
AS 1531
GB/T 1179


ACSR -Aluminum Conductor Steel Reinforced


APPLICATION
Used as bare overhead transmission conductor and as primary and secondary distribution conductor and messenger support. ACSR offers optimal strength for line design. Variable steel core stranding enables desired strength to be achieved without sacrificing ampacity. 

DESCRIPTION 
Aluminium Conductor Steel Reinforced (ACSR) is concentrically stranded conductor with one or more layers of hard drawn aluminium wire on galvanized steel wire core. The core can be single wire or stranded depending on the size. Additional corrosion protection is available through the application of grease to the core or infusion of the complete cable with grease.

STANDARDS
IEC 61089
ASTM B 232
BS EN 50182
AS 3607
GB/T 1179


AAC & AAAC & ACSR

 

 

Comparison Dimension	AAC  (All Aluminium Conductor)	AAAC  (All Aluminium Alloy Conductor)	ACSR (Aluminium Conductor Steel Reinforced)
Product Name & Standards	AAC	AAAC (6101-T81)	ACSR
	IEC 61089 / ASTM B230	IEC 62004 / ASTM B399	IEC 61089 / ASTM B232
Material & Appearance	Pure Aluminium Strands	Al-Mg-Si Alloy Strands	Aluminium Layers + Galvanized Steel Core
	Silvery surface, no coating	Anti-oxidation treated, matte finish	Outer Al shiny, steel core visible in cross-section
Key Selling Points	Lightweight & Cost-effective	Superior corrosion resistance (salt/fog)	Ultra-high tensile strength (1340MPa steel core)
	High conductivity (61% IACS)	30% stronger than AAC	Ideal for long spans
Primary Applications	Urban LV distribution	Coastal/Industrial zones	Extra-HV transmission (≥220kV)
	Short-span power lines (<100m)	Medium-span transmission (100-300m)	River crossings/Mountain routes (>500m span)
Certifications	CE, RoHS	TUV Rheinland (Salt Spray Test)	ASTM B232-18
	ISO 9001 (Factory Audit Report)	IEC 62004 Compliance	IEC 61089 Ed.3.0
Packaging & Logistics	Standard Export Package:	Corrosion-Resistant Packaging:	Heavy-Duty Packaging:
	- Wooden drums (IPPC marked)	- VCI paper + desiccant	- Customized steel crates
	- Moisture-proof film	- Steel-reinforced edges	- Anti-rust coating
	Lead Time: 15-20 days	Lead Time: 18-25 days	Lead Time: 25-35 days
Cost Efficiency	Best Price: $1,200-1,800/ton (FOB China Port)	Value for Money: $1,800-2,500/ton	Premium Pricing: $2,200-3,000/ton
		(Lower lifetime maintenance cost)	(Justified for critical infrastructure)
Payment & Warranty	30% T/T in advance, 70% before shipment	Flexible L/C at sight	Milestone payments (project-based)
	10-year warranty	15-year anti-corrosion warranty	20-year structural integrity guarantee

Industry Solutions
Power grid
New energy
Building
Industry
Marine cable
Telecommunication
Railway
Instrument

Our Certificate

Company Information


FAQ
1. Q:Are you a factory or trading company?
A: Manufacturing base in Henan ,China, with more than 150 workers.

2. Q:How can I visit there?
A: Sure,lf you need,we will arrange the driver to pick you up.

3. Q:How can I get some samples?
A: Contact me on below,Determine sample and address for shipping.

4. Q:Have you ever supplied cables to our country?
A: Xunda Cable have been sold to over 30 countries and regions in the world. you cancontact me for details.

5. Q:What is your MOQ?
A: MOQ Normally 1km for insulated cables(1 ton for bare conductor).Please contact mefor detail info if you have specific cable requirement.

6. Q:When can l get the price?
A: Usually quote within 3hours after we get your inquiry.

7. Q:How long is your delivery time?
A: According to your order's quantity.Usually our lead time is 3 - 20 working days.